

Drip Epoxy Ring Holder
MOQ 50 pcs
Specifications
| Model | Drip Epoxy |
|---|---|
| MOQ | 50 pcs |
| Customization | Custom logo, color and packaging, from 50 pcs |
| Packaging | Retail box, blister card or marketplace-ready packing |
| Feature | Custom logo |
Get price & samples
Tell us your target quantity — we reply with unit price, sample lead time and shipping cost.
The Drip Epoxy is a magnetic ring holder built around a printed face: your artwork goes down first and the epoxy layer is poured over it, which is where the model name comes from. That construction puts your logo under a raised, glossy surface instead of leaving it as a flat print on the outside of the holder. It runs on existing tooling, so a first order starts at MOQ 50 pcs.
The epoxy face, and what we do not publish
What this page confirms is the construction: a magnetic ring holder with an epoxy-covered printed face, produced on tooling that already exists. What we do not publish here is the body material, the dimensions, the weight, the magnet grade and the dome height — for this model we have no measured figures that are ready to publish, and we also have no abrasion test result for the print, so we do not put a wear figure next to it either. If your listing needs any of those numbers, raise it at RFQ stage; the measured drawing for your exact version is sent before order confirmation, together with the sample, so what you publish matches what your customer receives.
Drip Epoxy or PC Clear: two ways to carry a logo
This is the model for ranges that sell on artwork: licensed characters, mascots, a pattern collection, gift and seasonal drops. The natural comparison inside our own range is the PC Clear, which also takes a custom logo, but prints it on a clear polycarbonate body. The difference is where the artwork sits: on the PC Clear the print is on the outside of the piece; on the Drip Epoxy it is covered by the epoxy layer, so the surface reads raised and glossy rather than flat. Buyers who want the artwork to be the visible value of the SKU usually take the epoxy face; buyers who want the clear look take the PC Clear.
OEM options and lead times
MOQ is 50 pcs per model, including your artwork, colour and retail packaging. Artwork is approved as a digital mock-up before the run, packaging is printed to your file, and we sign an NDA when the design is customer-owned — the licence for a character stays between you and the rights holder; we print the file you supply. Samples ship in 7-10 working days after confirmation; mass production runs 7-12 days after you approve the sample, plus 3-5 days for packing and final inspection, FOB Shenzhen. In China we hold 8 granted patents (CNIPA), a registered trademark (no. 80143576, Class 9) and a copyright registration; we do not hold CE, RoHS or SGS certificates, and we say so before you ask. If your market requires test reports, raise it at RFQ stage so the sample plan can include the testing.
Frequently asked questions
The five questions buyers ask us first. If yours is not here, send it with the form below.
What is the MOQ and the lead time?
MOQ 50 pcs per model, including your artwork, colour and retail packaging. Samples in 7-10 working days, mass production 7-12 days after sample approval, plus 3-5 days packing and final inspection, FOB Shenzhen.
Can I print my own licensed character?
Yes — send us the artwork. The licence is between you and the rights holder; we print the file you supply and we do not license characters on your behalf. For customer-owned designs we sign an NDA.
How is the Drip Epoxy different from the PC Clear, which also takes a logo?
The artwork sits differently. The PC Clear prints your logo on a clear polycarbonate body, so the print is on the outside. The Drip Epoxy pours the epoxy layer over the print, so the design is covered by a raised glossy face. Same MOQ, same lead times, different look on the shelf.
Can you make custom phone grips in bulk with our logo?
Yes — Feigangxia makes custom phone grips in bulk from 50 pcs per model. Choose any of the 21 already-molded grips and holders, or send your own design; the logo goes on the ring, the base plate or the packaging by laser engraving, silk-screen or UV print. We keep your artwork and colour reference for repeat orders.
Do your grips work with MagSafe cases and mounts?
Feigangxia's magnet rings are sized to line up with MagSafe-style cases; for a very thick rugged case we recommend the double-sided OX-3 so the outer face still holds a mount. We do not claim Apple certification or a MagSafe licence — order a sample and test it with the case you plan to sell.
What is your minimum order quantity?
Every model made by Feigangxia starts at 50 pcs, including custom logo, color and packaging. Tell us your target quantity and we reply with unit price and lead time.
How long does a sample take?
7–10 working days from confirmed drawing to sample. Samples ship by express, and we quote the freight together with the sample cost.
Can you print our logo?
Yes. Laser engraving, silk-screen and UV printing on the ring, the base plate or the retail packaging. Send your artwork in AI, EPS or PDF and we show a mock-up before production.
Do you provide certifications?
We do not currently hold CE, RoHS, REACH or SGS certificates. If your market requires third-party testing, we can arrange it as part of the order and confirm the standard and scope before sampling. We sign an NDA whenever your own design is involved.
What is the lead time for mass production?
7–12 days of production after the sample is approved, plus 3–5 days for packing and inspection. We ship FOB Shenzhen or by express.


