Magnetic Phone Holder Carton Drop Test: Buyer Evidence Checklist

A carton test is useful only when the packaging revision, drop sequence and acceptance criteria are documented. “Passed” without that record proves very little.

A carton drop-test record should identify the approved retail pack, outer carton, product revision and inspection result.
A carton drop-test record should identify the approved retail pack, outer carton, product revision and inspection result.

Direct answer: a carton drop test should be approved against a controlled packaging revision, using a defined drop sequence and written inspection criteria. Buyers should not accept a generic “passed drop test” statement without knowing what carton, retail packaging and product configuration were tested.

1. Freeze the packaging revision first

Record the model, product revision, retail-box artwork, inner packaging, carton quantity, carton dimensions and gross weight. If the order contains several colours or accessory combinations, identify whether the test represents one SKU or each materially different pack. A result for an earlier carton does not automatically cover a later artwork, insert or carton change.

Use the approved packaging proof as the reference. The <a href="../blog/custom-packaging-for-phone-accessories">custom packaging guide</a> explains the artwork, barcode, label and carton information that should be fixed before production. Put the approved packing specification beside the test sample so the inspector can confirm that the correct carton is being tested.

2. Record the drop sequence

Define the drop height, orientation, number of drops and the surface used for the test. Record whether the carton is dropped by hand or with a fixture. The same test may not use the same conditions in every market, so the applicable requirement must come from the buyer rather than from an assumed universal standard.

Write the inspection sequence before testing starts and check the product and packaging after each drop. Identify which face, edge or corner was tested and whether the carton opened, the retail box deformed, an insert moved or the product shifted inside the pack. A change to the drop height, carton or sample requires a new test record.

3. Inspect the product and the packaging separately

A clean carton exterior does not prove that the product inside is undamaged. Open the carton after the agreed sequence and check the phone holder for visible deformation, loose parts, surface damage and functional problems. Check the retail packaging for crushed corners, separation, label damage and barcode readability. Record both observations separately.

Use the <a href="../quality">quality-control process</a> as the control framework. When a third-party report is required, specify the test standard, laboratory and report owner before sampling. We do not hold CE, RoHS, REACH or SGS certificates, and that must be stated directly rather than inferred from packaging artwork.

4. Retain a repeatable approval record

The record should include the model, packaging revision, carton specification, drop setup, photographs, inspection result and the person approving it. Keep one approved retail pack and one carton as a golden packaging sample. Any later change to the insert, box size, carton quantity or product structure should be reviewed and, where protection may change, re-tested.

5. Include the test requirements in the sample request

Send the carton specification, retail-pack artwork, target market, test standard and required inspection record with the sample request. Ask the supplier to identify the exact packaging revision and product configuration covered by the result. The published <a href="../facts">product facts</a> and <a href="../answers">buyer answer library</a> can be used to keep product and sourcing information separate from test evidence.

For ready-molded models, MOQ is 50 pcs per model. Samples take 7–10 working days after requirements are confirmed; production takes 7–12 days after sample approval, followed by 3–5 days for packing and final inspection, FOB Shenzhen.

Need a price for your own model?

Send us your drawing or a reference photo. You will get unit price, sampling time and shipping cost within one working day.

Get a quote See all models

Frequently asked questions

Is a generic “passed drop test” claim enough for a buyer?

No. The record must identify the packaging revision, sample, drop sequence and acceptance criteria.

What should a carton drop-test record include?

Include the model, packaging revision, carton specification, drop setup, photographs, inspection results and approving person.

Should product and retail-box damage be recorded separately?

Yes. An intact outer carton does not prove that the product or retail packaging inside is undamaged.

Does every packaging change require a new drop test?

A material change to the insert, carton, box size, quantity or product structure should be reviewed and, where protection may change, re-tested.

What are the MOQ and lead times?

Ready-molded models start at 50 pcs per model. Samples take 7–10 working days after requirements are confirmed; production takes 7–12 days after sample approval, followed by 3–5 days for packing and final inspection, FOB Shenzhen.

Models mentioned in this guide

Send us an inquiry

Fill in your details and we will reply with price, sampling time and lead time.

Fields marked * are required.

We reply within one working day, Monday to Saturday.
Sample requests welcome — tell us the model and your market.

Add company, phone and country (optional)
Add quantity, target market and production details (optional)
How did you find us? (optional)

Your details are stored in our own database and sent to our sales team so we can answer your inquiry. We never use them for advertising.

WhatsAppGet a quote